yes thats what i did. the bracket can be a real simple Piece...1/4 piece of aluminum you can buy at Home depot or lowes bore your Hole (fire system installation directions should give the Hole size) and place the threaded end cap.....you will see its a fairly simple fab that can be done with basic household tools. the aluminum tubing is really flexiable and will conform to however you want to bend it...just don't make a sharp bend and crink it
Good luck and hope you never need to use the equipment but great to have
Thats how I was envisioning we would do it – but just wanted to see if we were on the right path or if somebody had a better solution / idea. Thanks again for the suggestions and help - Scott