View Single Post
Old 01-04-2011, 09:19 AM
  #1  
Moparmike55
Junior Member
SHOW GUEST
 
Join Date: Feb 2010
Posts: 4
Default Small block Mopar thrust bearing problem

I haven’t ever seen this before, but the crank looks to be pushed forward from the torque converter and is wearing down the thrust bearing. This is a cast crank 340; there is about a 1/8 to 3/16 gap unbolted between flex plate and converter. Spins freely, and moves back and forth easily. The forged crank 340 has no problem with same Trans and converter. Any ideas?? Thanks,
Mike
Moparmike55 is offline