Thread: ladder bar help
View Single Post
Old 01-03-2010, 01:22 PM
  #6  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

My crossmember is between the frame railes not below.My car has a full 2x3 frame from the stock clip back... My front mount on the bars is in the lowest hole on mine...if you squat down on your knees and look under the car you can see the heims joint and bolt just below the frame and the bar is level with the ground. I would go out and measure it for you but I'm not at home right now.
Tod74 is offline