Originally Posted by TS1955
First: For street use I wouldn't lock out the dist. I would leave the advance
functional.
Second: That sounds like too much cam shaft for 9.6-1 compression. JMO
TS1955
X2 on the cam too big, we run a similar motor but 468" with 456 gears and 14.5 X 32 tires and a turbo 400 trans. Car weighs 3700 lbs without driver we have 10.2 compression, same heads you have, 1050 dom. We had a similar cam .723 int .723 ex. It ran 10.50's @ 126 mph. We put a smaller cam in (show below) We now run low 10.40's @ 129 MPH and come home bolt the mufflers on and drive to Sonic for burgers.
JMO
Zip.