View Single Post
Old 10-01-2009, 01:38 PM
  #5  
TopspeedLowet
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 504
Default

If you still want to run your tires out of the wheel well after reading the above entries, then the thing you have to look for is to make sure that the front tires do not hit the rear edge of the front wheel well's. When you turn with low back space rims like you are describing, the tires rotate rearward when you turn and likely will hit a factory opening. The fix is cutting the opening larger or more practically, use the correct back space rims that fit the vehicle. You will find that you can not deviate much from the factory rim back space dimension, especially with larger diameter tires.
Good luck on your project
Bruce
TopspeedLowet is offline