I run the AW32 also with good success. I think I would just tighten up the band about 1/2 a turn and see what happens. There is nothing majorly wrong with the trans. I agree that you adjusted the band properly that is the same specs I use (72 inch pounds 3.5 turns out). Maybe it was just a little twisted when it was adjusted who knows. Like I said I would just turn it in about 1/2 a round and try it see what happens.. If that does not fix it I know there is a valve in the valvebody that can stick it caused mine at one time to rev up between gears and then try to back up..too the valveout and cleaned then it was fixed..