Originally Posted by BEAST477
Have you checked your float level? What kind of fuel pressure are you running?
This is what I did, several times..
1)Set fuel pressure to 6 1/2 psi
2)set float levels (found debris in needle and seat and re set)
3)set idle screws to give maximum rpm by ear (didnt use vacuum gauge)
4)checked for 15 thousandths clearance on the accelerator pump arm and screw
On the last cruise night the car was stalling while parking, I noticed that my front fuel bowl was higher than I had set it, which may have been caused by the chewed up O-ring on the needle and seat as pictured.