Originally Posted by harley12110
lets see cam is not purchased yet open to ideas.....heads are out of the of dart 345 block is a bowtie tall deck ..crank is lunati pro mod 4.500 stroke.. rods are eagle 6.800 pistons are je 4.600 bore this motor was a shfiroff 598 built in 03 and hurt a rod in 06 then set in a buddys garage til igot it last year he has the cam that was in it ...it came from shafiroff with dart 360 heads which he kept..for his 632 t is going in my 215wb four link dragster.....if it builds enough steam i will run the top dragster series at lebanon valley and epping nh if not i will just bracket race it ....
OK can help ya out here, Erson Cam 420-116 Grind, This is a Reher Morrsion Hot Rod Series cam, 806/765 284/298 @ 50 112 Cl 7/4 Swap Cam. This cam is used by a lot of motor shops and makes good hp. The heads will hold you back for sure on this size CI motor, they would work better on 496-540 CI. They will work but not as good as others. I would assume with them heads and if you get compression 14.5-15:1, a sniper intake, on alky it'll make 950-960HP honest. A good head on it such as bb3x's it'd make 1050-1075. If your car is fairly light 1900ish it'll go 7.5's or so.