View Single Post
Old 10-30-2007, 05:05 PM
  #4  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

No problem. All you really need to do is remove the plastic cover under the dash on the drivers side, and look up by the ignition switch. The dimmer is on the left side of the column, kinda round and white on the end facing the steering wheel. You'll be able to see the very end of the rod with a z-bend going into the center of the dimmer switch. I think all you'll need is a 3/8th's or 11/32's end wrench to remove the two nuts. If I remember correctly, one of them also holds the ignition switch to the column, and the other just holds the dimmer.
johnracer is offline