View Single Post
Old 09-06-2007, 04:08 PM
  #3  
ssym
Member
JUNIOR BUILDER
 
Join Date: Apr 2007
Location: West Palm Beach, Florida
Posts: 71
Default

Still working on the same project with a '66 Chevy II.

What I did:

Level the car on jack stands, left to right, front to rear, front and rear, left and right. This is a long process in its self.

Plumb Bob both front hubs and back hubs. Mark a cross (X) point from LF to RR and RF to LR. This point should be half the distance from front to rear and half the distance from right to left.

I was able to adjust this point to 0/0 with the 4 link.

I'll let you know in a couple months how it works out.

Steve
ssym is offline