View Single Post
Old 12-22-2010, 05:00 PM
  #6  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default


IF you were to TRY to use what you have, it just wouldn't be worth the time as it all needs to come off and start over from the primer out. To save the factory base, ALL of the clear has to be removed without disturbing the base. Next to impossible.....
Start sanding one panel at a time, as time allows, primer seal it, then move on to the next when you can.
TheYellaBrick is offline