Thread: holley 600 help
View Single Post
Old 08-24-2016, 09:38 AM
  #5  
levisnteeshirt
Junior Member
SHOW GUEST
 
Join Date: Jul 2009
Posts: 1
Default

One of the power valves may be stuck open , cycle it with your finger , look at the metering block , eye level with the mixture screw, see if there is a brass restrictor in the second hole over from the power valve on each side, and see if u can find the diameter of the hole ,, check the idle air bleeds at the top ( google a pic ) toward the outside and see if they are blocked
levisnteeshirt is offline