Thread: Push rod length
View Single Post
Old 06-23-2020, 01:49 PM
  #3  
dustinarens
Junior Member
SHOW GUEST
 
Join Date: Jun 2020
Posts: 1
Default

When you are trying to check pushrod length with a hyd roller lifter the plunger is getting depressed due to the valve spring is overcoming the spring inside of the lifter. You will need to use a solid lifter with the same seat height/ a checker spring on the head/ or dissemble the lifter and take out the spring and replace with washers to make that lifter solid.
dustinarens is offline