Jordan1984

I have a 1995 impala ss, wanting to do some upgrades to but would like some input from the guys on here before I jump the gun. I am already planning on a 411 gear and 2800 stall converter in the 4L60e. All the specs I find on the LT1 impala engines says that its a 10.2:1 motor, that redline is 5800 rpm. I have already got an edelbrock air gap intake 1500-6500 rpm. Anybody recommend a good cam? I was thinking of a LT4 cam .525/.525 lift with 112 lobe centerline, duration at .50 218/228. I cannot find the rpm range on this cam no where. My other choice of cam is a 507/510 lift, 110 centerline, 284/296 duration, comp cams extreme energy, I had this same cam in my monte and it was very impressive. Any ideas or recommendations for the build? It will be a street car that will see occasional track time but mostly on the weekends around town.

Jordan