zipper06

O'k here are the pics. The main frame is 3"X1 1/2" channel, they run around the ouside and there are 2 runners 18" inboard front to back. The main pull (center) is 3"X2"X 3/16" wall rec. tubing there are 5 cross braces also 3" channel. the traile looks like crap because it hasn't been painted since 2000. It could also use some new wheels, they are also 24yrs. old. I originally had plywood in the center, but added the center diamond plate after a couple yrs. All the diamond plate is 1/8". The ramps are made from 1 1/2" angle and covered with expanded metal they slide in from the back.It measures 84" on the inside of the fender wells. The most critical point on this trailer is the location of the center pivot point on the tandum axles. It never moves around behind the tow vehicle, i've even towed my 3250lb Malibu behind my 1979 El Camino no problems.

Zip.