Old 05-24-2008, 11:20 AM
  #10  
dak697
Senior Member
MASTER BUILDER
 
Join Date: Mar 2003
Posts: 127
Default

I use a 2 channel meter...simular to the computec one.. I thnk Fluke make one simular to the one 1 have ...The nice thing about it is that it has a min and max button on it...I do the burnout and press the min max button... then make the pass.... on the return road I hit the max button and check both probes.. We run a BBC and I have a probe in both the short and long runner...When we 1st started running I would move the probes to different cyl. on a test day just to see if I had a cylinder that ran leaner or richer than the rest...I think If I was to do it again I would look at the Racedata datta Logger/Dash. Their unit is identical to the Comuptec unit (I think they get them from the same place) so I could see all 8 cylinders and some other settings
dak697 is offline