I have wheelie bars on it. but I'm trying to keep the preasure off the rear end because even with the bars adjusted all the way down as far as they go it still comes up. without the bars it came up and drug my rear bumper I thought it was going over. so I put the bars on it. I was just wandering how some are comming out so hard and not standing up without bars. and also I've read where you may mess your pinion angle up by moving to the bottom hole. it has adj.coil overs on the front and I've tried different adjustment on the front with no help. I guess I can just live with it. I just thought it may help in ET's to keep the front down and still come out @ 4000 I bought the car like this and I don't know that much about chassis work but I've read where a good set up chassis with lower H/P will beat a poorly setup with more H/p given everything else equal. Thanks for you replys helpful or not.
Andy