View Single Post
Old 06-30-2009, 11:37 AM
  #9  
CamBirdRacing
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2009
Posts: 510
Default

C.E. sends a couple of washers that you need to put on either side of the Hiem joints. These are your spacers for the bolt clearance. They are about 1/8 to 3/16 thick. And yes you do need them if you want to run the safety loops. If you already welded you brackets on, you need to cut them off, move them out and reweld.
CamBirdRacing is offline