Thread
:
Adjusting valves cold ?
View Single Post
05-30-2007, 09:50 PM
#
6
margaritaman
Member
JUNIOR BUILDER
Join Date: Nov 2004
Location: Home of Bill and Ted
Posts: 92
With iron block and iron heads, add .002"
With iron block and aluminum heads, subtract .006".
With both aluminum block and heads, subtract .012
I knew it was somewhere. This is what I used on initial startup to get close.
Reply
margaritaman
View Public Profile
Send a private message to margaritaman
Find More Posts by margaritaman