View Single Post
Old 06-25-2011, 01:54 AM
  #2  
TopspeedLowet
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 504
Default yes

You can use as many as you can afford. Just be sure to use the bearing type and not the cheep pinned ones. The way you can tell is the cost on the good ones are about $75.00 each, Flaming river makes the ones I use. I use two 1/8" hardened roll pins on each end of the U joint to connect them to the 3/4" chrome molly tube.
Bruce
TopspeedLowet is offline