Thread
:
need 2 grind my rockers down to make my valve covers fit
View Single Post
02-20-2008, 04:35 PM
#
2
MileHighMan
Junior Member
APPRENTICE
Join Date: Mar 2006
Posts: 12
xp. I don't have a part # for you but I used a very thick gasket from felpro. Is like over a 1/4in thick. Cleared stud girdle and all. Really saved my a$$. Good Luck. Dan.
Reply
MileHighMan
View Public Profile
Send a private message to MileHighMan
Find More Posts by MileHighMan