Old 07-03-2007, 12:51 PM
  #6  
billhendren
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Rutherfordton North Carolina
Posts: 192
Default

Check the polarity of the mag pickup.look at what your timing is set at then unplug the dist and take two short pieces of wire,plug one end of the wire into the loom, cross the leads and plug them into the dist .start the engine and look at your timing.with the digital box the most advanced position is correct with an analog box its the most retarded one thats correct.Bill
billhendren is offline