Thread: DRY SUMP ?
View Single Post
Old 08-12-2012, 07:58 PM
  #4  
wazup
Senior Member
EXPERT BUILDER
 
Join Date: Dec 2010
Posts: 345
Default

I was just worried about any thing getting into the pump from the pan. I have had good luck i geuss over the years with running nitrous and this is the first time using a dry sump. When the piston blew a hole in it there was two big parts of the piston that was laying on top of a plate with about 1/4'' holes in it but there was also alot of debree on the bottom of the pan. I looked at the fittings with the screens but thay look like thay would restrict the oil flow some what. What about running a oil filter with a bypass in it.

Thanks for the info RABBIT
wazup is offline