View Single Post
Old 01-07-2012, 05:06 PM
  #12  
Harbone
Moderator
RACING JUNKIE
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 4,041
Default

Actually DD I used a product called Peel & Seal from Lowes, its identical to Fatmat and about half the price.

The stuff works great, use a wallpaper roller in the tight spots and it cuts easy with just a razor.
3 rolls knocked out the floorboards, gonna have to go buy 1 more tomorrow to do the doors and behind the back seat.










So then I tore into the cluster, got a good deal on a housing with solid tabs and a nice lens. The temp, amp and fuel gauges are in surprisingly good shape. I will be ordering the oil psi gauge from Gaugemarks here shortly. The circuit board has some minumal delamination but everything still works so a good cleaning, some new screws and polish up the old screws and it looks pretty good!





















Hope to get the door panels off tomorrow and insulate them. Need to start on the dash warp too hopefully Sunday
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline