Thanks Mr. Parker I'm sure that's right, well I put it back in the way it came out anyway. but yea from looking at pictures of others I think its right. I did not know that fluid preasure was what released the valve. I thought it was the spring. if fluid was what released the valve then on mine when you are just testing the solenoid and you hit the button it would not release if the car is not running without the spring. so I'm gonna buy a new spring and try that first. but The trans does have some runs on it so I'm sure it needs to be gone through. and this will be my first Trans job but I believe I'm gonna do this one myself and see if I'm as smart as I think I am. if you guys have any Advise I would sure listen to everyone on this.
THANKS Andy