View Single Post
Old 08-27-2016, 11:49 PM
Senior Member
mytmouz's Avatar
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,009

I installed new spring mounts in the frame in the front so I can use long travel coil overs. I also mocked up the a arms and coil overs for now, and I machined the stock drum hubs so I can run 2002 camaro disc brakes and rotors (not shown)...

I also installed a 9 inch with 35 spline axles and roto joints, and the massive engineering bars, along with 2002 camaro rear discs...

Currently, it rests on some BMW rollers to move it around...

Last edited by mytmouz; 08-27-2016 at 11:53 PM.
mytmouz is offline