View Single Post
Old 08-27-2016, 11:45 PM
Senior Member
mytmouz's Avatar
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,009

At that point I had about 60 actual hours worked, doing it myself...

I spent a day on it later on finishing out the tubs...

By doing it myself, I had like 20 bucks in materials in the job, plus my free labor...

I used the tops of the 80% skins I had to finish out the tubs, since I only needed the lower part of both, the factory quarters are pretty clean... (the tubs are roughed in in the pic, I will body work them when I get around to the car...

Last edited by mytmouz; 08-27-2016 at 11:49 PM.
mytmouz is offline