Old 02-28-2012, 07:36 AM
Senior Member
Join Date: Jun 2007
Location: Standing right behind you
Posts: 1,162

Thanks for all the help!!

I pulled the rockers and pushrods, removed the heavy lube from the passages and reinstalled and reset valves. Rotated the engine and primed the pump and the rockers started to lube sequentially as I spun the motor. The comp cams lube was just not letting the oil trickle past. Though on start up all would have been well as it disolved.

Lesson learned. I am buttoning up the intake tonite and then it goes back in the Green Monster this weekend, and yes I added an additive with ZDDP for cam break-in.

Scorpion1110 is offline