Thread: cam timing
View Single Post
Old 07-22-2011, 07:43 PM
  #4  
wazup
Senior Member
EXPERT BUILDER
 
Join Date: Dec 2010
Posts: 345
Default

I agree with Zip on the bigger cam, something in the low six hunderds or advance the cam in the engine. This will give a little more bottom end power and when you advance it you will bring the intake valve closer to the piston. Would really need to know what size pistons and where the valves open and close. I would advance the cam and check the PVC this should help.
wazup is offline