Thread: blowing smoke
View Single Post
Old 03-26-2014, 07:55 PM
  #2  
coloradoguy
Junior Member
SHOW GUEST
 
Join Date: Jun 2004
Posts: 6
Default

Have you checked the rings? Almost sounds like oil is getting past them. Might also want to check the intake sealing, make sure it's not pulling oil from the intake valley, and lastly make sure all you rocker studs are sealed. Oil can get past the studs, especially on the intake and cause this condition. Most likely a ring issue though, from the sounds of things.
coloradoguy is offline