Thread: Dart Iron 345
View Single Post
Old 09-22-2008, 04:19 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

If you can get your hands on a beret, or any cc measuring device, you can drill a 1/4" hole in a plexaglass plate, with the valves installed lay a thin layer of grease around the combustion chamber and fill up the combustion chamber, keeping track of the cc's poured into the chamber. No way to measure the flow except on a machine.

Zip.
zipper06 is offline