View Single Post
Old 08-23-2011, 06:32 AM
  #101  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Originally Posted by kod99
Originally Posted by shawnp
Updates?
Sorry I am a little late with updates.

2 runs Sunday at 90 degrees F and 6000' DA.

Run #1
Nozzles: 39
Pill: 90

Left on the foot brake so ET was not great. 8.43

Sprayed oil out of vacuum pump breather again.
Changed oil after run. Very milky. Far worse than with the 41 nozzles and 88 pill.

Run #2
Nozzles: 39
Pill: 95

Car ran 8.20

Sprayed oil out of vacuum pump breather again.

Drained breather - oil was still very milky. I had to cut the top off of a water bottle to drain the breather. The knife was very sharp. I did contemplate cutting my wrists! LOL

One more race weekend coming up Sept 2 - 4.
I am thinking of putting on a crab and switching to gas for that weekend and see if there are any issues with oil spray.

I don't know how much leaner I should go on the methanol.
I would go no leaner, there has to be air sucking or a restriction, did you have your data logger hooked up ?
hammertime is offline