Old 02-28-2010, 04:27 PM
Senior Member
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default Cam-- engine specs

Thanks guys ..

I am running Alcohol... with Dart 360 heads.. The heads do not have alot of work done to them them. I just spent over 900 bucks on the Isky roller x extreme lifters.. thats when we found the 'chip" in the lobe on the cam. i figure at this point maybe new valve springs are in order to go with the new lifters and cam. Bear with me im not an "engine builder thats for sure.
I will look at the cams u guys are suggesting. i apreciate it ..

dynaguy03 is offline