View Single Post
Old 03-25-2009, 02:14 AM
  #1  
bftstam
Junior Member
SHOW GUEST
 
Join Date: Feb 2004
Posts: 3
Default Regulator placement

I was told fuel regulators for nitrous need to be close to the solenoids. Is this true?

I'm thinking of mounting two (one for each system) right above the water pump on a bracket with a fuel log. That will be about 12" to each side of the fogger and maybe 6-8" from the plate.

How about the regulator for the carb? Should I put it on the log too? It's on the fender well right now with about 30" of line to front bowl and 30" to rear bowl. One regulator port goes to front bowl and one goes to the rear bowl.
bftstam is offline