View Single Post
Old 11-09-2009, 06:55 AM
  #4  
sp2816
Senior Member
MASTER BUILDER
 
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
Default

With the car only having the front end limited to only about 2-3" of front end travel, I would go with the solid bars and not the ones with the springs and would adjust the center of the wheel to be about 6" off of the ground.

Here is a couple of pictures of a set that I built for a '68 Camaro from the ART kit. I stopped these right about the parachute, so he wouldn't be as likely to trip on them. The car runs 5.15's @ 130 in the 1/8th.



Bill
sp2816 is offline