robinhorn

I have a 70 nova and installed a set of wilwood disk brakes on the rear and left the stock disk up front. I am having a issue with getting a good pedal. I have a 1 inch bore wilwood master with no p-valve.

The problem is the padel will travel very far when applied with front and rear brakes connected. If I block the front off the pedal moves maybe a 1/2 inch and gets rock hard. If I hook up the front and block off the back the padel travels well past the half way mark before getting hard.

I know the system is free of air, I put almost a gallon or fluid through the master.

My question is, does anyone else have this same set up if so how does the pedal feel. OR will i need to buy the wilwood fronts to balance out the system.

Thanks