HP Dominator air bleed questions
On the HP ( NEW STYLE) Holley Dominators, what are the differences between an 8896-1 and an 9375-1, other than the air bleeds? I know the 8896 is for single carb application and the 9375 is for 2 carbs. Both are annular discharge now, unlike the older style where only the 9375 was? Both are 3 curcuit now, where only the old stlye 9375 was?
The high speed air bleed is .034" on the 9375-1 and the 8896-1 is .040". The idle and intermediate air bleed are the same on both HP carbs.
So can you just change those air bleed and make a HP 9375-1 into a HP 8896-1, or are there other differences in the metering blocks or main body?