Is this carb to BIG?
I'm building a 505ci. BBC, Pro Top Line iron 320s , Edelbrock Victor, Doug Herberts soild roller .703 int. .708 exh., 270 int. 279 exh. @ .50, just shy of 10.1 comp., Eagle crank, Eagle H-Beams, SRPs, Build th350 with 10" 3800 stall, Dana with 4.10s, The car weighs about 3500lbs. with driver, The car is going to see the 1/4 once a month & the street about 300 miles a month. I have a 1050 Holley is this going to work with my application or should i find something a little smaller?