View Single Post
Old 07-28-2010, 02:41 PM
  #7  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

Originally Posted by sslarue
Thanks everyone for all the responses. Hopefully it is something that will never have to be used.
Brian - Did you just run your lines on the inside under the dash, and then come thru the fire wall and fab some sort of mounting bracket for the nozzles?

Thanks - Scott
yes thats what i did. the bracket can be a real simple Piece...1/4 piece of aluminum you can buy at Home depot or lowes bore your Hole (fire system installation directions should give the Hole size) and place the threaded end cap.....you will see its a fairly simple fab that can be done with basic household tools. the aluminum tubing is really flexiable and will conform to however you want to bend it...just don't make a sharp bend and crink it

Good luck and hope you never need to use the equipment but great to have
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline