View Single Post
Old 06-09-2009, 09:38 AM
  #2  
CamBirdRacing
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2009
Posts: 510
Default

You will eventually bend the springs, but give it a few years.

when I ran mine, I didn't put any preload into them. I just barely touched them to the top of the spring. Make sure you get someone about your wieght sitting in the car on the drivers side. Then adjust them accordingly to the track conditions. I never noticed any difference with preloading or not preloading, just make sure they are both sides adjusted the same.
CamBirdRacing is offline