Originally Posted by vega34
Originally Posted by hammertime
How high you want to zing the motor ?
What brand of conv and is it a sprag or spragless ?
ptc 5800 converter,not sure if sprag or not,,,,6800 would be just about it on the motor,,thanks steve
Do you know what the stall flash is and the recovery after shift ?
I think 4:88 is to much, I used to run a 355 sbc that'd go 5.40s with a 4:10 gear and 60ft 1.15-6 no issue, took me 3 converter changes to get there though.