Re: Blown Alcohol
[quote="skipjobe"]We have a 15-1 CR 355 sbc built really stout and wondering if we can run a blower and alcohol at this compression ratio. if so how much boost?[/quote
(((IF)))You Even Think about it?Heres what I would Suggest?
Put a .100 Copper Head Gasket on it,and Dont go Over 5% OD,acttually I would UNDERDRIVE it about 10% and see where Your Boost #'s are?
I have ran some as High as 13.5.1.
What Block are you Using?The More Head-Studs that you can get the Better!
Later
G 8)