Thread: hot heders
View Single Post
Old 05-15-2007, 09:10 PM
Senior Member
Join Date: Mar 2007
Location: mich
Posts: 208

check the timing the fuel is still burning when the exh valve is opening. you can stop the glow by advancing the timing. the best way to run it is with the dist lock at around 36deg and use a boost retarder to pull timing out as it makes boost. start with pulling 1 1/2-2deg per psi of boost and work down from there. you have alot of main jet in it to check the plugs more then likely there very black.
slowman is offline