Harbone

Managed to have a few beers and tinker with the car this weekend. My inner door window felts that I installed last spring had started to pop off, rivets were to short so I took the panels off and drilled out the rivets. I used 1/8" wide and 1/4" grip rivets this time and they seemed to hold a lot better. I am still waiting on the LED brake light kit for the tail lights but went ahead and spliced in the new sockets, looked for any worn, chaffed or brittle wires in the harness and fixed everything along with cleaning up any ground points. Now it has 4 park/brake lights across the back. Hopefully the LED boards will be here soon but with everything cleaned up all 4 lights have the same brightness now.














I had also purchased a footwell courtesy light harness and housings.
My car never came with them so I thought it would be a nice touch. I also learned that I am getting to old to be squeezing up under the dash with the front seats still installed!
They look good but I might have to go buy some LED bulbs to make things just a tad brighter.