Originally Posted by TS1955
Originally Posted by fast75vega
Originally Posted by TS1955
Originally Posted by fast75vega
thats the reg vic jr ... not the super vic jr... right? my bro-inlaw has it on his 434 in his vega with world product heads and flat top pistons... like 12to1 comp and 4.30 gear in a ford 9" and ran like 9.40's on alky.
No fast...It's a new intake for 2012. A Super Victor II. It has a carb height of 6.75" where my HV1000 is 6.225"
TS1955
so if it sits higher... it should give you more rpm and less torque right? i know the intake runners were the same on the reg vic and the super vic.... just the super vic had the carb that 2' higher. id throw a half inch spacer on the one ya got and try it first......lol
I have a spacer on mine already. I was wondering if the design difference would make more power.
TS1955
curious if they changed it or just made it taller...i would have to see one.... cause i know the other two were the same except the super vic had a taller spacer but the runners were the same inside.