Originally Posted by JEFF69Z28
Originally Posted by Rigsby
This is a little cheesy, but it worked when I was way younger:
I had to toggle-switch a dist once to "off" then crank motor & flip ign "on" while motor was already turning... fired up easy every time. I was too poor to afford any fancy delay box... used a good toggle & a fusible link into the dist.
Go ahead... call me a jimmie-rigger. It worked. Scooter
allstar performance makes a switch to do this,part number 80140
after breaking a few starters, I got in the habit of always turning motor over and flipping ignition switch on after its turning over real good
I have a starter button and a seperate ignition switch
I start a 13.2 to1 motor with a $100 cheap mini starter has worked for 2 yrs racing, I have 33 deg fixed and I dont have a start retard box