The 80532 and 80533 both come from Holley with 97 square and NO power valves. Someone has messed with it. Go back to 97 square, if you want to run a primary PV start with 93's in the front, do NOT use one in the secondary. Make sure you use notched floats and jet extensions. You may want to post the #'s off the metering blocks, make sure they are correct for the carb. I won't be home till tomorrow night, I can get the #'s off of the blocks I removed from mine to compare. Some times the carb's list # is on the blocks, but not always. Here is the websites for Holley info.
For General carb info
http://www.holley.com/data/TechServi...%20Listing.pdf
Bleed data for carbs with Holley installed removable bleeds
http://www.holley.com/data/TechServi...ifications.pdf