View Single Post
Old 08-27-2009, 01:59 AM
  #3  
TS1955
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Default

Originally Posted by cepx111
The air valve (top set of butterflies) on the secondaries could be out of adjustment, very tricky to set right if they've been messed with.
If they open to quick you'll get a bog when you go WOT if they open to slowly you'll get poor performance @ WOT.
The way you desribed your problem sounded like they may be opening to slowly.

Make a small adjustment on the spring (looser) and test drive it and see if it's better or worse and then make appropiate adjustments there on.

Hope this helps, Cp
X2...I worked on one for a couple of hours one day before I got it right. Q-jets can be a pain sometimes. But when they are right they work pretty good. JMO.

TS1955
TS1955 is offline