Originally Posted by andybyrd
Well I ran all the wires again and they are like you say they should be. what I did just to see if it is a weak spring I put a very simple outside return spring on it and now when I hit the button and release it it releases NOW so I'm going to try that Saturday. But If the pro brake is released buy fluid preasure and I don't have enough preasure to release it without the spring. then even when I release it with a spring it may be slow to react. do to lack of fluid preasure would that be true or false, Thanks guys this forum is very informative and great learning place,
Andy Byrd
Andy if you didn't have at least 150lb of pressure your clutches would slip. You could be a little lower than than you should. But in my opinion your plunger or your valve body is sticking.
You can check your pressure by removing the plug on your sirvo cover, and putting a guage on it. Should be at least 190lb. You may burn up your solenoid by using the spring on the outside.