Originally Posted by andybyrd
dooracer I may have read your post wrong. are you saying you have two switches, one to back up with and one for the transbrake, or one switch with a wired in diode thats used for the transbrake and for backing up. Mine only has one switch. and now that i've cut the diode out I don't remember exacatly but would it go between the two step box and the button. and Todd I don't know that answer someone smarter than I will have to answer that.
thanks Andy
Andy,
Yes I use 2 different switches, one for launching and a different switch for backing up. The reason I use different switches is the one for backing up is not momentary so I can use both hands and I don't have to hold the transbrake switch down. I am not exactly sure how yours is wired or what it was used for I just added what I use one for.
A pro brake also keeps you from getting the car into reverse on the big end if you put it into neutral because the solenoid has to be energized even if the shifter is in the reverse position.
Curtis